Wilife WLPB-100

Wilife WLPB-100 manuál (návod)

(1)
  • Step
    1
    Set up Power Injector & Cameras
    C. Use CAT5e or CAT6 cable only. Validate hand-built
    cables using a professional cable tester. All cables
    pairs (1/2, 3/6, 4/5, 7/8) must be sound.
    The world’s first and only fully-integrated, PC-based,
    Professional Digital Video Security System designed
    for small business and home application.
    Use this guide to set up the following Pro products:
    Pro
    www.wilife.com
    Four-Camera Master System
    with Command Center Software
    WLPIC-4X6
    Six-Camera Master System
    with Command Center Software
    WLPIC-6X6
    Indoor Digital Camera Kit
    WLPC-810i
    Single-Camera Master System
    with Command Center Software
    WLPIC-1X6
    Indoor Camera with Single-Port
    Injector Kit
    WLPIC-1X1
    Six-Port Power Injector
    with Command Center Software
    WLPI-X6
    KITS
    Components
    Setup Guide
    Before You Get Started
    This setup guide will assist you in installing and setting up the
    WiLife Pro digital video security system. Simply follow these
    instructions and you will be up and running fast.
    A. Ensure the PC meets these system requirements:
    B. Test Internet connection speeds for remote viewing
    and e-mail & cell phone alerts:
    D. Gather the following setup information:
    E-mail address (to be used as WiLife Online account
    user name) and password.
    E-mail (SMTP) server, user name, and password for set up of
    e-mail and cell phone alerts.
    * Intel
    ®
    Pentium 4 CPU speed. Dual-core Intel and AMD processors deliver
    similar performance at lower clock speeds.
    **Microsoft Vista requires more memory to deliver equal performance.
    Requirement
    CPU Speed*
    Memory (MB)**
    Video Card (MB)
    Display Resolution
    Hard Drive (MB)
    Operating System
    Media Player
    Number of Cameras
    1 2 3 4 5 6
    2.2 GHz
    3.2 GHz2.4 GHz 2.6 GHz 2.8 GHz 3.0 GHz
    512
    512
    512 768 1024 1024
    32 32 64 128 128 256
    1024 X 768 or higher, 32 bit color
    150 MB for program and a minimum of 10 GB for video storage
    Microsoft
    ®
    Windows
    ®
    XP or Microsoft Vista
    Microsoft
    ®
    Windows
    ®
    Media Player version 9 or later
    Feature
    Internet Bandwidth Requirement
    E-mail & Cell Phone Alerts
    Remote Viewing
    Upload at 64 Kbps (ISDN, DSL, Cable) with always-on link.
    Upload at 128 Kbps (DSL, Cable) with always-on link.
    Test upload speeds using one of many online speed test sites. We
    recommend www.speedtest.net or www.speakeasy.net.
    The WiLife Pro Power Injector delivers power over the Ethernet
    lines to each WiLife Pro Camera.
    Step
    3
    Complete First Run Wizard
    Create a new account or use an existing account for WiLife Online access.
    The wizard automatically runs as you start the Command
    Center for the first time. It walks you through the initial setup
    of system options and configuration of your cameras.
    Step
    2
    Install WiLife Software from CD
    By default, the cameras will search for an IP
    address using DHCP. While the cameras are
    searching for an IP address, all three status
    LEDs will flash. When the camera has obtained
    an address, the bottom status LED shows solid.
    Use DHCP whenever possible. But, if you must assign static IP
    addresses, follow these instructions:
    Using Fixed IP Addresses (Advanced)
    Connect the WiLife Pro Injector power supply. Consider using a
    UPS to protect against brief power outages.
    Connect one patch cable (provided with camera) for each camera
    from the LAN to the “To Network” injector ports 1 through 6.
    Connect WiLife Pro Cameras to injector “To Camera” ports, using
    the same ports connected to LAN.
    You can get additional information by reading the WiLifeSetIPAddress PDF.
    Enter the IP addresses and click Set to write the address to the cameras.
    Select the LAN Network Card and click Start to search for your cameras.
    Copy the WiLifeSetIPAddress EXE and PDF to the PC hard drive.
    The files are located on the WiLife CD in the bin directory.
    Run the WiLifeSetIPAddress program, first ensuring the WiLife Command
    Center is not running.
    You can now proceed to step 2.
    The WiLife Command Center Software turns a standard
    PC into a powerful video security control station.
    To install the software, ensure you are logged in as Administrator.
    The installation process takes several minutes and includes
    powerful tools like Microsoft .NET 2.0, UPnP, and Intel IPP.
    You are required to reboot the machine after the install to ensure
    the drivers are properly recognized by Windows.
    Select the WiLife Pro Power Injector networking option.
    Step
    4
    Confirm Online Direct Connect
    There are two methods for connecting to the WiLife Online
    servers - direct and relay. Direct mode is the best.
    Pro Install Notes and Cautions
    In relay mode, video is relayed through WiLife servers, avoiding
    router and firewall setup - but, it includes limits on viewing time.
    In direct mode, video is routed directly to remote viewing clients,
    enabling unlimited viewing time and faster connections.
    By default, WiLife will automatically attempt to configure the
    local router and firewall to enable Direct connections using
    UPnP. In most cases, it is successful.
    To verify that WiLife was able to configure your router, open
    the Setup...Online tab in the Command Center and look for
    the connection mode. If it reads Direct Mode, you are done.
    Follow these steps to manually configure your system for
    Direct Connections:
    Enable UPnP on your firewall or router, if possible or ...
    On your router, map ports 20570 to 20572 (TCP) to the computer's
    IP address. You may find the site www.portforward.com helpful.
    Restart the WiLife Command Center and recheck the Online Status.
    You can find additional information in the WiLife Support
    online knowledgebase at www.wilife.com/support.
    Take the time to carefully place and hide your cables. We have
    included a thin silver cable and cable coupler to help you
    create an attractive install.
    If you move cameras from one system to another, you should
    always reset the cameras using a paperclip.
    Specifications
    Operating Temperature
    Operating Humidity
    32º F to 92º F (0º C to 34º C)
    Up to 90%, non-condensing
    Having problems discovering cameras. Follow these steps:
    1. Verify the injector and camera have power.
    2. Ensure all cables are connected and tested.
    3. Confirm that the camera has received an IP address from
    the network. When the camera is searching for an address,
    all three status LEDs will flash in unison. Once it has
    received an address, the bottom LED will show solid.
    4. Use Setup...Advanced...Find My Cameras to search for
    cameras.
    Find more helpful information at www.wilife.com/support.
    Check camera focus to ensure best image results. Use WiLife
    120º and 54º lenses to better target specific areas.
    Operating Environment
    Indoor - protected from water and dust
    Cabling
    CAT5e with RJ-45 connectors per IEEE 802.3
    Lighting
    2 lux Standard, 0 lux with WiLife NightVision kit
    Use a WiLife NightVision kit to add support for capturing video
    in complete darkness.
    Camera Resolution
    640 X 480 and 320 X 240 - user selectable
    Network Bandwidth
    300 kbps to 800 kbps - user selectable
    Frame Rate
    15, 10, and 5 FPS - user selectable
    Check the WiLife Command Center help file (F1) for more
    assistance on configuring PC Firewalls.
    WARNING: Mis-connected cables may cause damage
    to either your cameras or network equipment.
    Free Remote Viewing for anywhere,
    anytime video access
    Internet
    Extend the system to
    standard WiLife cameras with the
    WiLife Pro HomePlug
    ®
    Bridge
    Command Center
    Cameras
    www
    Pro Power Injector
    (with Router shown for clarity)
    WLPB-100
    The WiLife Single-Port
    Power Injector links a
    single camera to the LAN
Wilife WLPB-100

Potřebujete pomoc?

Počet otázek: 0

Máte dotaz ohledně Wilife WLPB-100 nebo potřebujete pomoc? Zeptejte se zde. Poskytněte jasný a komplexní popis problému a vaši otázku. Čím více podrobností uvedete ke svému problému ve vaší otázce, tím snazší bude pro ostatní majitele Wilife WLPB-100 vaši otázku zodpovědět.

Zde si můžete zdarma prohlédnout příručku pro Wilife WLPB-100. Tato příručka patří do kategorie Wifi opakovače a byla ohodnocena 1 lidmi průměrným hodnocením 7.5. Tato příručka je k dispozici v následujících jazycích:Engels. Máte dotaz ohledně Wilife WLPB-100 nebo potřebujete pomoc? Zeptejte se zde

Specifikace Wilife WLPB-100

Všeobecné
Značka Wilife
Model WLPB-100
Produkt Wifi opakovač
EAN 853650001343
Jazyk Engels
Typ souboru PDF
Přenos dat
Maximální přenosová rychlost 54 Mbit/s
Hmotnost a rozměry
Rozměry (ŠxHxV) 76 x 140 x 203 mm
Hmotnost (imperiální) 0.725 lbs

Často kladené otázky

Níže naleznete nejčastější dotazy, týkající se Wilife WLPB-100 .

Není vaše otázka uvedena v seznamu? Zeptejte se zde

manualypdf.cz

Hledáte příručku? manualypdf.cz zajišťuje, že najdete příručku, kterou hledáte během okamžiku. Naše databáze obsahuje více než 1 milion příruček ve formátu PDF pro více než 10 000 značek. Každý den přidáváme nejnovější příručky, takže vždy najdete produkt, který hledáte. Je to velmi jednoduché: stačí zadat značku a typ produktu do vyhledávacího pole a můžete si okamžitě prohlédnout příručku vašeho výběru online a zdarma.

manualypdf.cz

© Autorská práva 2021 manualypdf.cz. Všechna práva vyhrazena.

Užíváme cookies, abychom vám zajistili co možná nejsnadnější použití našich webových stránek. Pokud budete nadále prohlížet naše stránky předpokládáme, že s použitím cookies souhlasíte.

Více